Owners ŠKODA Superb sooner or later they face the need to replace the battery in the key-lighter or key fob with buttons. The first signs of discharge are a decrease in the range, spontaneous door locks or flashing of an indicator on the instrument panel. The procedure seems simple, but has a number of nuances: from choosing the right type of battery to the risk of damaging the body with a careless opening.

In this article - step by step instructions for all types of keys Superb (including models with keyless access) Keyless), comparison of batteries, and list of common mistakeswhich cause the stain to break. We have taken into account the features of the keys for restyled versions (2019+) and original configurations since 2015.

Types of ŠKODA Superb keys and their features

Cars ŠKODA Superb third generation (index 3V) are provided with three main types of keys. The type depends not only on the process of replacing the battery, but also on the choice of the power cell.

  • 🔑 Retractable blade lighter key - Classic version for basic configurations. The battery is hidden under the back cover, access to it requires care due to fragile latches.
  • 📱 A key fob with buttons and a folding key - The most common type. It has two buttons (open/close) and a hidden metal key for mechanical locking.
  • 🚗 Keyless-keychain (keyless access) - for versions with the system KESSY. It has an enlarged body and a special antenna for communication with the car.

Models after the facelift of 2019 may have an updated keychain design, but the design remains identical. Logo keys ŠKODA on the front (instead of the VW) use batteries of the type CR2032 year-to-year.

📊 What type of key does your ŠKODA Superb have?
  • Key lighter
  • Keychain with buttons
  • Keyless
  • I don't know

Which battery to choose: types and analogues

For all keys ŠKODA Superb (except for early versions prior to 2015) a lithium battery type is used. CR2032 with tension 3V. However, there are cheap analogues on the market that can reduce the life of the keychain.

Battery type Capacity (mAh) Manufacturer Service life (approx.) Price (RUB)
CR2032 (original) 220–240 Panasonic, Duracell, Energizer 3–5 years 80–150
CR2032 (budget) 180–200 GP, Varta, Camelion 1–2 years 30–60
DL2032 220 Analogue CR2032 from Duracell 3–4 years 100–130
BR2032 190 For extreme temperatures 2–3 years 120–180

⚠️ Attention: Labeled batteries LR (for example, LR2032) alkaline, not lithium. They have less stress (there is less stress).1.5V) and don't fit for keys ŠKODA. Their installation will lead to unstable operation of the keychain or complete loss of communication with the car.

For keys with system Keyless It is recommended to use batteries with high capacity (for example, Panasonic CR2032P) as they consume more charge due to constant signal exchange with the machine.

💡

Before buying, check the date of production on the battery pack. Lithium cells lose up to 20% of their capacity in 5 years of storage in a warehouse.

Step-by-step instructions: replacing the battery in the lighter key

Lighter keys (Flip Key) fitted to basic equipment Superb until 2018. Their main feature is a retractable blade and a minimalist body without buttons.

Take a picture of the location of springs and contacts |Prepare a thin screwdriver or plastic spatula |Buyed battery must be new (not from the package of 2020)|Work on a soft surface (towel, napkin)->

  1. Remove the metal blade. Push the key into the working position and pull it on yourself - it will separate from the case.

  2. Separate the housing. Insert a screwdriver into the groove on the back cover (logo side ŠKODA) and carefully pull the halves apart. Don't use force - plastic latches!

  3. Remove the old battery. Pry it off with a screwdriver or your fingernail. Please note + (plus) - it should be on top when installing a new one.

  4. Install a new battery. Use only CR2032. After installation, check that the contacts fit tightly.

  5. Collect the key. Connect the halves of the body before clicking, then insert the blade back (it is fixed automatically).

⚠️ Attention: If the key does not work after the replacement, check the polarity of the battery. Mixed up +/− The most common cause of malfunction. Also check the contacts for oxidation (cleaned with alcohol).

What to do if the key cannot be disassembled?

If the case does not lend itself, try to heat it with a hair dryer (temperature 40-50 ° C) - the plastic will become more elastic. Do not use metal objects to disassemble, so as not to scratch the logo.

Replacing the battery in a key fob with buttons (2015–2023)

Key fobs with buttons LOCK/UNLOCK - the most common type for Superb. Their body is attached to three latches, one of which is hidden under a folding key.

Replacement algorithm:

  1. Remove the folding key. Press the button at the bottom of the keychain and pull out the metal part.

  2. Open the case. Insert a screwdriver into the slot next to the key ring and carefully push the halves apart. It will start on the side opposite the buttons.

  3. Take out the board with the battery. It is fixed with two plastic stops - pry them off with a screwdriver.

  4. Replace the battery. Old CR2032 may stick to the contacts - do not tear it off by force, but pry it from the side. The new one is installed with the plus side up.

  5. Check your work. Press the key fob buttons - if the indicator flashes, but the car does not respond, perform reset sync (see section below).

⚠️ Attention: Do not touch the contacts on the board with bare hands - static electricity can damage the chip. Use an antistatic glove or hold the board by its edges.

If after replacing the buttons work, but the range of action has decreased, the problem may be key fob antenna. In this case, diagnostics in the service is required.

💡

For key fobs with buttons, it is critical to maintain the polarity of the battery. Mixed-up contacts will lead to a short circuit and failure of the board.

Features of replacement in Keyless key fobs (KESSY)

Keys with system Keyless (KESSY) have an enlarged body and an additional antenna for contactless access. Their battery lasts on average 2-3 years due to constant power consumption.

Replacement process:

  1. Remove the back cover. It is secured with four latches. Start at the corner where the logo is located ŠKODA, and carefully pry it off with a screwdriver.

  2. Remove the battery. B Keyless-key fobs use the same CR2032, but sometimes it occurs CR2026 (0.7 mm thinner). Check the markings on the old battery!

  3. Install a new battery. Standard polarity: + up. After installation, check that the spring contact is not bent.

  4. Sync the key. After replacement, a system reboot may be required KESSY: Start the car, turn off the ignition and wait 1 minute.

⚠️ Attention: If, after replacing the battery, the car does not recognize the key from a distance, but reacts when you touch the door handle, the problem is key fob antenna. In 80% of cases, reflashing the key in the service helps.

For Keyless- systems it is critical to use batteries with a high discharge current. Optimal choice - Panasonic CR2032P or Energizer Ultimate Lithium.

Common mistakes and how to avoid them

Even with the apparent simplicity of the procedure, the owners ŠKODA Superb They often make mistakes that lead to breakage of the key fob. Here are the most common:

  • 🔧 Using inappropriate tools. Metal screwdrivers scratch the body, and blades that are too wide break the latches. Use a plastic pick or a special phone opening kit.
  • 🔋 Buying cheap batteries. Unbranded batteries often have a real capacity that is 30–40% lower than declared. This leads to rapid discharge and leaks.
  • 🔄 Poor polarity. In 90% of cases, a key that does not work after replacement has a mixed up +/−. Check the markings on the board.
  • 🚫 Application of force during assembly. If the case does not close, it means that the board is installed crookedly or the spring contact is interfering. Don't push - take it apart and check again.

Another typical problem is loss of synchronization between the key and the car. If after replacing the battery the car does not respond to the key fob signals, follow these steps:

  1. Get into the car and close all doors.

  2. Insert the key into the ignition and turn it to position ON (do not start the engine).

  3. Press and hold the button LOCK on the key fob for 5 seconds.

  4. Turn off the ignition and remove the key. Synchronization has been restored.

If the procedure does not help, you will need to reprogram the key in the service. ŠKODA (cost ~1,500 rub.).

What to do if the key does not work after replacing the battery

If the key fob does not show signs of life even after correctly replacing the battery, the reasons may be the following:

Symptom Possible reason Solution
The indicator on the key fob does not light up Oxidation of contacts or open circuit Clean the contacts with alcohol, check the integrity of the spring
Buttons cannot be pressed Moisture or mechanical damage Dry the key fob in rice for 24 hours or replace the buttons
The car does not respond to the signal Synchronization failure or antenna malfunction Perform a reset (see above) or contact service
The key only works close Weak signal due to cheap battery Replace with a quality element (Panasonic, Duracell)

⚠️ Attention: If the key is dropped into water or exposed to extreme humidity, do not turn it on immediately. Disassemble, dry the board with a hairdryer (cold air) and leave in a dry place for 48 hours. Using a wet key fob will lead to corrosion of the contacts.

To diagnose faults you can use scanner ELM327 with the program VCDS (VAG-COM). It will show immobilizer errors and key communication status. For example, code P1610 indicates loss of synchronization.

FAQ: Answers to frequently asked questions

Can a CR2026 battery be used instead of a CR2032?

Technically CR2026 thinner by 0.7 mm and has a smaller capacity (150 mAh versus 220 mAh for CR2032). In most keys Superb it does not fit due to insufficient contact with the spring. The exception is some Keyless-key fobs, where replacement is allowed, but the service life will be reduced by 1.5 times.

How often should the battery in the key be changed?

The service life depends on the type of key:

  • Key lighter: 4–6 years.
  • Keychain with buttons: 3–4 years.
  • Keyless: 2–3 years (due to constant power consumption).

Signs of a discharge: a decrease in the range of action to 1–2 meters, double pressing the button to activate, flashing of the indicator on the instrument panel (KEY).

What should I do if the key is lost after replacing the battery?

If the key stops working after replacement, follow these steps:

  1. Check the polarity of the battery (plus should be on top).
  2. Clean the contacts on the board and battery with alcohol.
  3. Reset sync (see section above).
  4. If it doesn’t help, contact the service for reprogramming.

The cost of reprogramming the key in the official service ŠKODA — from 1,200 to 2,500 rubles.

Can I replace the battery myself if the key is under warranty?

Replacing the battery is not covered under warranty, so you can do it yourself without voiding your vehicle's warranty. However, if you damage the case or board in the process, you will have to pay separately for repairs or replacement of the key.

Official dealers ŠKODA They change the battery free of charge as part of the maintenance, but only if the key is brought with the car to the service.

Where to buy an original key battery Superb?

Original batteries CR2032 for keys ŠKODA you can buy:

  • In official service centers (price ~150 rubles).
  • In auto parts stores (AutoSpetsCenter, existential).
  • In online electronics stores (M.Video, Svyaznoy - but check the production date!).
  • On Wildberries or Ozon (look for options marked “for car alarms”).

Avoid shopping at markets or stalls - there is a high probability of running into a fake.