Car ownership Skoda Superb The second generation (type 3T) brings a lot of fun thanks to the spacious interior and excellent ergonomics, but sometimes you have to face unpleasant situations, such as a crack on the windshield. Unlike the simpler models, windshield design often involves a complex system of sensors, making self-replacement or repair in an inappropriate service risky.
Glass on Skoda Superb 2 is not just a transparent element of the body, but part of the safety and comfort system. Errors in selection or installation can lead to stratification, fogging or even failure of electronic driving assistants. Therefore, it is important to approach the issue of replacement with the utmost care, taking into account the peculiarities of the specific year of production and configuration of your car.
Design features and types of glass for Superb 2
Windshield Skoda Superb The second generation comes in two main variations: with and without a rain sensor. The presence of this sensor radically changes the algorithm of dismantling and subsequent installation, as it requires careful disconnection of the connector and proper alignment when installing a new element.
It is also worth paying attention to the presence of heating of the wiper zone. This option, available in rich trim levels, greatly facilitates the operation of the car in the winter, but complicates repairs. When the heating filaments are damaged, replacement is often the only way out, as repairing the conductive layer rarely produces a lasting result.
It is important to distinguish between glass with and without a zone under the rear-view mirror. In some versions, the mirror is attached directly to the glass, in others - to the body. The wrong choice can lead to the fact that the mirror simply does not stand up in the regular place, leaving a gap or breaking the geometry of the view.
- 🚗 Glass with rain and light sensor (for automatic control systems)
- ❄️ Option with heated threads in the area of wipers
- 🛡️ Tempered glass with enhanced protection against penetration (triplex)
⚠️ Attention! When buying glass, be sure to check the VIN code of the car. Even minor changes in the body design that occurred during facelift can make the glass from the early version incompatible with your car.
Manufacturer's choice: Original or high-quality analogue?
The auto parts market offers a wide selection of glass for Skoda Superb 2, but not all of them meet high quality standards. Original from Skoda (often produced by companies AGC or Saint-Gobain Sekurit) ensures perfect geometry and optical properties, but can be priced well above the market average.
Alternatively, certified analogues are used, such as Asashi, Beltparts or Novex. These brands often use the same factories and manufacturing techniques as the original suppliers, but offer products at a more affordable price. The main condition is the availability of all necessary certificates of quality and conformity.
Do not save money on buying cheap glass from an unknown manufacturer. Cheap analogues often have distortions at the edges, which puts additional strain on the driver's vision, especially at night. In addition, the quality of the adhesive layer may be insufficient, which will lead to leakage or detachment of the glass in severe frost.
- 🏭 AGC One of the world leaders, the quality is often identical to the original
- 🛡️ Saint-Gobain - premium quality, excellent optics
- 💰 Asahi - Proven Japanese brand, the optimal ratio of price and quality
- Original Skoda
- Quality analogue (AGC, Asahi)
- Cheapest option
- I buy used glass
Preparation for replacement and necessary tools
Windshield replacement process Skoda Superb 2 requires careful preparation. First of all, it is necessary to provide a safe place to work: a flat surface, no dust and direct sunlight, which can dry the glue too quickly. If you plan to do this yourself, make sure you have an assistant as the glass is heavy and brittle.
You will need a set of specialized tools: a string for cutting old glue, spatulas for removing residues, a glass cleaner, a degreasing agent and high-quality polyurethane glue. A conventional sealant will not work - it will not provide the desired strength of the clutch and tightness.
It is also important to prepare the car: remove the interior skin in the area of the windshield, disconnect the connectors of sensors and mirrors. Be very careful with the wiring so as not to damage the contacts. If there is a rain sensor on the glass, it must be carefully dismantled and transferred to the new glass.
☑️ Preparing for glass replacement
Pay special attention to cleaning the body opening. Residues of old glue should be completely removed and the surface defatted. Any contamination can lead to the fact that the new glass will stick loosely, which will later cause drafts or leaks.
- 🧹 Glass cleaner and degreasing agent (acetone or specialized composition)
- 🔪 Sealer string and spatula
- 🔧 Set of screwdrivers and keys for removing anchorages
How to remove the rain sensor correctly?
First, turn off the connector, then gently tuck the sensor with a plastic spatula. Do not apply force to the glass so as not to crack. The sensor has a glue base, so it must be transferred to a new glass, having previously cleaned the surface of the old glue.
Installation process and installation nuances
Installation of the windshield on Skoda Superb 2 starts with fitting. The new glass must be carefully inserted into the opening to make sure that all the holes match and the gaps are uniform. Only then can the glue be applied. Application occurs along the perimeter of the glass or body (depending on the technology) in a continuous strip.
After applying the glue, the glass is set in place and fixed with paint tape. It is important not to allow displacement until the glue is grasped. Usually, the initial grasping time is about an hour, but full drying takes up to 24 hours. At this time, you can not open the door or wash the car.
If your car has an automatic control system wipers, after installation, you need to check the operation of the rain sensor. To do this, turn on the ignition and spray some water on the glass in the sensor area. The wipers must be activated automatically. If this does not happen, it is possible that the sensor is installed incorrectly or damaged.
Cost of work and where to order the service
Cost of windshield replacement Skoda Superb 2 depends on a variety of factors
the selected glass manufacturer, the availability of sensors and heating, as well as from the region and level of service. On average, the price of original glass starts from 15 000 rubles, while quality analogues can be found for 8 000 - 12 000 rubles.
Installation and calibration work usually costs from 5,000 to 10,000 rubles. This cost includes dismantling old glass, preparing aperture, applying glue, installing new glass and calibrating sensors. Some services offer comprehensive packages that include all the necessary work and a guarantee for the work done.
When choosing a service, pay attention to the availability of specialized equipment for calibration of electronic systems. Conventional tire shops or general car service centers may not have the necessary equipment, which will lead to the need for a revisit for calibration.
Many owners Skoda Superb 2 choose specialized glass replacement centers, as they offer a narrower specialization and experience with models of the VAG concern. Such centers often have contracts with glass suppliers, which allows you to offer more favorable prices.
⚠️ Attention! Always ask for a guarantee for the work done. Quality services give a guarantee of 1 to 5 years for tightness and absence of chips.
FAQ: Frequently asked questions
How long does it take to replace the windshield on the Skoda Superb 2?
The replacement process usually takes 2 to 4 hours, including preparation, dismantling, installation and primary drying of the glue. However, if calibration of sensors is required, the time can be extended to 5-6 hours.
Is it possible to drive immediately after replacing the glass?
No, it is recommended to wait at least 1-2 hours after installation until the glue is grasped. Full operation is possible only after complete drying, which takes about 24 hours. At this time, you can not open the door and wash the car.
Do I need to change the rain sensor when replacing the glass?
No, the rain sensor can be moved from the old glass to the new one, if it is not damaged. However, if the sensor has defects or you want to upgrade it, you can buy a new one. It is important to properly perform its installation and subsequent calibration.
What happens if you don't calibrate the rain sensor?
Without calibration, the system may not work properly: wipers may turn on too often or too rarely, or not respond at all to rain. This reduces comfort and can create an emergency.
Is it possible to replace the glass yourself?
This is theoretically possible, but requires special tools, skills and experience. Errors when self-installation can lead to leaks, creaks or damage to electronics. It is better to entrust this work to professionals.