Door sills Škoda Superb is not just a tuning element, but a practical solution for protecting the body from chips, corrosion and mechanical damage. Owners of this model know that factory thresholds, especially in winter, suffer from reagents, sand and accidental impacts. Properly selected overlays will not only extend the life of the paintwork, but will also give the car a more aggressive or, on the contrary, elegant look, depending on the chosen style.

In this article we will look at all the key aspects: from materials and types of linings (plastic, aluminum, carbon fiber) up to step-by-step installation instructions with your own hands. We will pay special attention to compatibility with different generations Superb (B6, B7, B8), as well as the nuances of choosing versions Liftback and Combi. If you are in doubt whether you need pads or how to use them correctly, here you will find answers to all questions, including unique data on the effect of pads on aerodynamics and noise in the cabin.

Why do we need door sill covers? Škoda Superb?

The main function of the overlays is protection of the bottom of doors and thresholds from external influences. In the conditions of Russian roads this is especially relevant:

  • 🛡️ From chips and scratches: When driving, sand, gravel and road debris fly off the wheels and hit the sills, leaving microdamages that eventually lead to corrosion.
  • ❄️ From reagents and salt: In winter, municipal services liberally sprinkle roads with chemicals that corrode the paintwork. The pads create a physical barrier.
  • 🚗 From accidental blows: When parking or opening doors in tight yards, the risk of the threshold hitting a curb or pole is very high.
  • 🎨 Aesthetic component: The overlays visually “lower” the car, making it sportier (especially true for versions with ground clearance).

In addition, overlays can improve aerodynamics by optimizing air flow along the body. For example, models with integrated skirts reduce the drag coefficient (Cx) by 2-3%, which has a positive effect on fuel efficiency at high speeds. However, this effect is only noticeable when using high-quality products with a precise fit.

⚠️ Attention: Cheap pads made of low-quality plastic can, on the contrary, worsen aerodynamics, creating turbulent flows. This leads to increased noise in the cabin at speeds above 100 km/h.

Another important plus - protection against dirt. The covers reduce the amount of splash that hits the bottom of the doors, making cleaning easier and reducing the risk of rust in the drainage holes.

Types of linings: materials and designs

The market offers several types of linings, differing in material, method of fastening and design. The choice depends on the budget, goals (protection or tuning) and the style of the car.

According to the material:

  • 🧱 ABS plastic: The most budget option (from 1,500 rubles per set). Lightweight, resistant to corrosion, but brittle in temperatures below –20°C. Suitable for temporary protection.
  • 🔧 Polyurethane: More elastic than ABS, withstands shock and deformation. Price: 2,500–4,000 rubles. Often used in off-road kits.
  • ⚡ Aluminum: Durable, lightweight, gives the car a sporty look. Cost: 5,000–12,000 rubles. Requires anti-corrosion treatment.
  • 🖤 Carbon fiber (carbon): Premium option for tuning. The weight is minimal, the strength is high, but the price starts from 15,000 rubles. Most often installed on Superb RS.

By design:

  • 🔄 Universal: Suitable for several models, require customization. Cheaper, but may look sloppy.
  • 🎯 Individual: Designed specifically for Škoda Superb specific generation (B6/B7/B8). Precise fit, but more expensive.
  • 🔧 With integrated lights or cameras: Premium options with LED strips or parking cameras (relevant for Superb III with the system Area View).
Material Strength Weight Cost (set) Difficulty of installation
ABS plastic ⭐⭐ Lightweight 1 500–3 000 ₽ Low
Polyurethane ⭐⭐⭐⭐ Medium 2 500–4 500 ₽ Average
Aluminum ⭐⭐⭐⭐⭐ Lightweight 5 000–12 000 ₽ High
Carbon fiber ⭐⭐⭐⭐⭐ Minimum 15 000–30 000 ₽ Very high

For most owners Superb the optimal choice would be polyurethane pads — they combine strength, flexibility and a reasonable price. Aluminum options are worth considering if you are planning serious tuning or often drive off-road. Carbon fiber is more a matter of image than practicality.

📊 What rubber material do you prefer?
  • ABS plastic
  • Polyurethane
  • Aluminum
  • Carbon fiber
  • I haven't decided yet

Cross-generational compatibility Škoda Superb

Linings are selected not only by material, but also by car generation. Threshold design in Superb B6 (2001–2008), B7 (2008–2015) and B8 (2015–present) is significantly different. Using linings from the wrong generation will result in poor fit, gaps and the risk of body damage.

Superb B6 (2001–2008)

For the first generation, the choice of pads is limited - most manufacturers focus on newer models. However, you can find:

  • 🔹 Universal plastic covers secured with double-sided tape.
  • 🔹 Aluminum options from Czech brands (for example, Eibach or H&R), but they require drilling.

Feature B6 — convex sills, so the pads must have the appropriate shape. Example: models from Hecko or AutoStyle.

Superb B7 (2008–2015)

The most popular generation among tuning studios. Available here:

  • 🔹 Polyurethane overlays with 3D texture (e.g. Maxton Design).
  • 🔹 Aluminum options with anodized coating (brands Eibach Pro-Kit or ST Suspensions).
  • 🔹 Overlays with integrated lighting (compatible with Ambient Lighting in top trim levels).

For B7 also produced extended overlays, which visually expand the wheel arches - relevant for versions with wide tires (for example, Superb RS).

Superb B8 (2015–present)

The newest generation has a more complex geometry of the thresholds, so it is important here precise fit. Recommended brands:

  • 🔹 Maxton Design (polyurethane, ideal fit for Liftback and Combi).
  • 🔹 Eibach (aluminium, compatible with adaptive suspension DCC).
  • 🔹 AutoStyle (carbon fiber for versions Sportline).

For Superb B8 also available with overlays built-in 360° cameras, which replace standard parking sensors (relevant for models with the system Area View).

⚠️ Attention: Overlays for Superb Combi (station wagon) differ from versions for Liftback! Make sure the product description states compatibility with your vehicle.

If you are not sure about the choice, use VIN decoder on the lining manufacturer's website or contact an official dealer Škoda for advice. Some brands (eg Maxton) provide 3D configurators, where you can check compatibility online.

Top 5 manufacturers of pads for Škoda Superb

The quality of the pads directly depends on the brand. We analyzed owner reviews and expert tests to rank the best manufacturers.

  1. Maxton Design (UK)
    Specialization: Polyurethane overlays with 3D texture.
    Pros: Perfect landing, UV ray resistance, 3 year warranty.
    ConsHigh price (from 6000 rubles).
    Models for Superb: B7, B8 (including) Combi and Sportline).
  2. Eibach (Germany)
    SpecializationAluminum tuning linings.
    Pros: Lightness, strength, compatibility with suspension DCC.
    Cons: It requires professional installation.
    Models for Superb: B6, B7, B8 (including RS).
  3. Hecko (Czech Republic)
    Specialization: Budget plastic and polyurethane linings.
    ProsLow price (from 2000 rubles), a wide range.
    Cons: Shorter service life (2-3 years).
    Models for Superb: B6, B7.
  4. AutoStyle (Poland)
    Specialization: Carbon and aluminum linings.
    ProsUnique design, the ability to paint in body color.
    ConsLong production time (3-4 weeks).
    Models for Superb: B7, B8 (including) L&K).
  5. ST Suspensions (Germany)
    Specialization: The sports version is for the sports version.
    Pros: Compatible with undersuspension, reinforced design.
    Cons: Limited choice for Combi.
    Models for Superb: B7, B8 (RS and Sportline).

When choosing a brand, pay attention to warranty obligations. For example, Maxton Design It provides a guarantee for the detachment of paint and cracks, and Eibach - to corrosion aluminum. Also check if it is included in the package. fixture (Some manufacturers have to buy them separately.)

💡

Before buying overlays from a little-known brand, check the reviews on the forums Skoda-Club.ru or Drive2.ru. Often cheap Chinese counterparts have problems with geometry and mounting.

Installation of the floors on the thresholds: step-by-step instructions

Installation of the pads can be done independently, if you follow the instructions and use the right tools. Let’s look at the process on the example of polyurethane linings Maxton Design for Superb B8.

Required tools:

  • 🔧 Screwdriver or screwdriver.
  • 🔨 Drilling (if drilling is required).
  • 🧴 Degreaser (eg. WD-40 or isopropyl alcohol).
  • 📏 Roulette or ruler.
  • 🎨 Painting Scotch (for body protection).

Step by step process:

  1. Preparing the car: Wash and dry the thresholds. Make sure the body temperature is not lower than +10 ° C (for better adhesion of the adhesion of the adhesive).
  2. MarkingApply the pad to the threshold and mark the mounting places with a pencil. Use the laser level for accuracy.
  3. Drilling (if necessary)For bolt-mounted linings, drill holes with a diameter of 4-5 mm. For Superb With aluminum rapids, use a metal drill.
  4. Degreasing: Treat the surface of the threshold and the inside of the lining with a degreasing agent.
  5. Applying glue: For double-sided scotch linings (3M VHBremove the protective film and press the product tightly. For bolt fastening, use a sealant (Loctite 577).
  6. Final commit: Fix the lining with bolts (if provided) and leave the car for 24 hours for full glue polymerization.

Carefully wash and degrease the thresholds

Check the completeness of the linings (mounting, instructions)

Prepare the tools (drill, screwdriver, scotch)

Make sure the temperature in the garage is not below +10°C

Remove the negative terminal from the battery (if drilling is required)->

For the overlays light-in Additionally you will need:

  • 🔌 Connect the LED tape to the on-board network (via the fuse 5A).
  • 📱 Set up synchronization with the system Ambient Lighting (if supported).
⚠️ Attention: When drilling thresholds Superb B8 Avoid areas where the harnesses are wiring (especially in the front door area). Use the wiring scheme from the manual or program ElsaWin.

If you are not sure of your abilities, it is better to contact the car service. The average cost of installing pads in Moscow is 2 000-4 000 rubles (depending on the complexity).

💡

For the slacks with a bolt fastener, be sure to use anti-corrosion treatment openings (e.g., Dinitrol ML). This will prevent rust in the drilling sites.

Care and maintenance of linings

To make the pads last a long time, they need to be properly operated and cared for. Basic rules:

  • 🧽 WashingUse a soft sponge and auto shampoo without abrasives. It's good for polyurethane linings. Karcher with a nozzle for delicate surfaces.
  • 🎨 Painting: If the pads scratch, restore the coating with the help of spray paint (for example, Motip). For carbon fiber, use a special varnish.
  • ❄️ Winter operation: After traveling on snowy roads, wash the pads with warm water to remove salt and reagents.
  • 🔧 Checking fasteners: Every 3 months, inspect the bolts and glue - if weakened, tighten or replace the fastener.

For aluminum linings Pay special attention to protection against corrosion. Handle them. anticorrosive (for example, Tectyl) once a year. Polyurethane products can be covered ceramic composition (for example, Ceramic Pro) for additional protection against UV rays.

If the patches have started move away from the body, the reasons may be as follows:

  • 🔹 Poor quality glue (especially if cheap tape was used).
  • 🔹 Incorrect surface preparation (wax or silicone residues).
  • 🔹 Temperature changes (if the car is often parked outside in winter).

In this case it is necessary:

  1. Remove the cover and clean the surface of old glue.
  2. Degrease the threshold and trim.
  3. Apply a new layer of glue (recommended 3M VHB 4950) and press firmly.
What to do if the lining is cracked?

If the crack is small (up to 2 cm), it can be repaired using epoxy glue (for example, Loctite Epoxy). To do this:

1. Sand the edges of the crack with 400-grit sandpaper.

2. Degrease the surface.

3. Apply glue and secure with tape for 12 hours.

4. After drying, polish the repair area.

If the crack is large or the pad is deformed, it is better to replace it with a new one.

Common mistakes when choosing and installing

Even experienced car owners sometimes make mistakes that lead to bad results. Here are the most common:

  1. Wrong choice by generation: Buying pads for Superb B7 on B8 (or vice versa) will lead to gaps and the need for revision.
  2. Ignoring weight: Heavy aluminum pads on weak suspension can degrade handling. For Superb with air suspension this is not relevant, but for versions with standard suspension it is better to choose polyurethane.
  3. Savings on fastening: Using cheap tape instead 3M VHB or lack of sealant when bolting leads to delamination.
  4. Not taking into account ground clearance: Long overhang trims may catch curbs. For Superb with ground clearance, choose models with minimal protrusion (up to 20 mm).
  5. Self-painting without preparation: Applying paint to untreated polyurethane or aluminum will cause peeling. Be sure to use a primer!

Another common mistake is installing overlays on dirty sills. Dust, wax or silicone polishes reduce the adhesion of the adhesive by 2-3 times. Always wash and degrease the surface before installation!

If you are planning low ground clearance (for example, after installing springs H&R), choose overlays with protective "skirts", which will prevent touching the asphalt. For Superb with air suspension this is irrelevant, but for versions with springs it is critical.

Do I need to drill the thresholds to install the trims?

It depends on the type of fastening:

  • 🔹 On double-sided tape: No drilling required, but these pads are less reliable.
  • 🔹 Bolted: Drilling required (usually 4-6 holes per side).
  • 🔹 Combined mount: Combines glue and bolts (best option).

For Superb B8 With aluminum thresholds, drilling must be done carefully so as not to damage the anti-corrosion coating.

Can the trim be painted to match the body color?

Yes, but the technology depends on the material:

  • 🔹 Plastic/ABS: Requires plastic primer (e.g. Plasti Dip) and acrylic paint.
  • 🔹 Polyurethane: Requires flexible paint (e.g. FlexiPaint) so that it does not crack due to deformation.
  • 🔹 Aluminum: Anti-corrosion primer and powder painting are required (under service conditions).
  • 🔹 Carbon fiber: Use a special varnish for carbon (for example, Carbon Clear Coat).

To select an exact color, use your paint code. Superb (indicated in the service book or on a plate in the trunk).

Do overlays affect the dealer's warranty?

The pads themselves does not void the warranty, but there are nuances:

  • 🔹 If the sills were drilled during installation, the dealer may refuse warranty repairs to the body in this area.
  • 🔹 If the pads damage the paintwork (for example, due to improper fastening), this can also cause failure.
  • 🔹 The pads do not affect the warranty on the suspension, engine or electronics.

We recommend keeping the receipt for the linings and photographs of the installation process - this will help in case of disputes with the dealer.

How to remove the trim without damaging the body?

The process depends on the type of fastening:

  1. For adhesive pads:
    • 🔹 Warm up the pad with a hair dryer (temperature 60–80°C).
    • 🔹 Gently pry it off with a plastic spatula.
    • 🔹 Remove remaining adhesive with solvent (White spirit or Autosol).
  2. For bolt linings:
    • 🔹 Unscrew the bolts and remove the trim.
    • 🔹 Seal the holes with silicone or special plugs.

If the overlay is glued to 3M VHB, its removal without damaging the paint is almost impossible - be prepared to polish the threshold.

Which pads are best for winter?

For operation in Russian conditions the following are optimal:

  • 🔹 Polyurethane: Do not break in the cold, resistant to reagents.
  • 🔹 Aluminum with powder painting: They do not corrode, but require anticorrosive treatment.

Avoid cheap ABS plastic - it becomes brittle at -20°C and can crack on impact.

For added protection, treat the linings anti-ice composition (for example, Liqui Moly Anti-Eis-Spray).