Windshield wiper blades for ŠKODA Superb 2: sizes, part numbers and step-by-step replacement

Wiper blades on ŠKODA Superb 2 (body 3T, 2008–2015) is a detail that many owners underestimate until they encounter poor visibility during rain. Worn windshield wipers leave streaks, squeak and can even scratch the glass, impairing your visibility and creating danger on the road. At the same time, replacing brushes is one of the simplest procedures that can be performed independently in 10–15 minutes, without resorting to the help of a service.

In this article we will look at everything you need to know about brushes for Superb 2: from original sizes and articles to step-by-step replacement instructions. You will learn how to distinguish high-quality brushes from fakes, which analogues are best suited, and how to extend the service life of new wipers. We will pay special attention unique feature of brush mounting on this model - it is different from most other cars VW Group, which often becomes the cause of mistakes when purchasing.

Original sizes and article numbers of brushes for ŠKODA Superb 2

On ŠKODA Superb 2 (including restyled versions) windshield wiper blades are installed different lengths for driver and passenger sides. This is important to consider when purchasing, as the wrong size will lead to a poor fit and rapid wear.

Official sizes:

• 🚗 Driver's side (left): 600 mm (24 in)
• 🚗 Passenger side (right): 400 mm (16 inches)

Original articles from ŠKODA:

Side	Article	Manufacturer	Note
Left (driver)	3T1 955 425 A	ŠKODA (OEM Bosch)	Set of 2 brushes
Right (passenger)	3T1 955 426 A	ŠKODA (OEM Bosch)	Often sold in pairs with left
Set (left + right)	3T0 955 425	VW Group	Suitable for Passat B6/B7, Audi A4 B7/B8

Important: original brushes are supplied with a mounting type "Hook", but on Superb 2 a modified version is used - Side Pin 9x3 (or Pin Arm). This often causes confusion, as many universal brushes will not fit without an adapter.

The best brush analogues for Superb 2: what to choose instead of the original

Original brushes from ŠKODA are more expensive than analogues, but do not always justify the price. Many owners choose alternative options from trusted brands that often outperform OEM in durability and cleaning performance.

Top 5 analogues with the correct fastening Side Pin 9x3:

• 🔹 Bosch Aerotwin AR 601S / AR 401S — frameless, with an aerodynamic profile. Articles: 3 397 004 641 (600 mm) and 3 397 004 637 (400 mm).
• 🔹 Valeo Silencio X-TRM 600 / 400 - with technology Teflon coating for silent operation. Articles: 608503 and 608500.
• 🔹 HELLA EcoWiper 600 / 400 - a budget option with a good fit. Articles: 8WL 355 039-801 (600 mm), 8WL 355 039-601 (400 mm).
• 🔹 DENSO Wiper Blade 600 / 400 — Japanese quality, frost-resistant. Articles: WB-120L and WB-080R.
• 🔹 SWF VisioNext 600 / 400 - German brand, optimized for high speeds. Articles: 1191006000 and 1191004000.

When choosing analogues, pay attention to:

• ✅ Mounting type - must be Side Pin 9x3 (sometimes denoted as Pin Arm or VW Hook).
• ✅ Availability of adapters — some brushes come with a universal mount and adapters.
• ✅ Rubber material - optimal natural rubber or silicone (lasts longer).

How to determine brush wear: 5 signs that it’s time to change

Windshield wiper blades are consumables that need to be replaced every 6–12 months, even if they look normal on the outside. Rubber loses elasticity over time due to UV radiation, temperature changes and mechanical wear. Here are the key signs that the brushes require replacement:

• 🌧️ Stains on glass — after the wipers work, stripes remain that do not disappear even after turning them on again.
• 🔊 Creaking or knocking - indicates damage to the rubber blade or corrosion of the metal parts of the frame.
• 👓 Poor visibility in the rain — the brushes cannot cope with the flow of water, leaving “islands” of dirt.
• 🔍 Cracks in rubber — visually noticeable ruptures or delaminations of the material.
• 💧 Water flows past — the brushes do not fit tightly to the glass, especially at the edges.

You can check the condition of the blades with a simple test: moisten the glass with water and turn on the windshield wipers at minimum speed. If after 2-3 passes dry areas or streaks remain, the brushes are worn out.

What happens if you drive with worn brushes?

Poor visibility in the rain increases the risk of accidents by 40% (according to the traffic police). In addition, damaged brushes scratch the glass, which leads to the need to polish it or replace it (the cost of a new windshield for Superb 2 - from 25,000 rubles).

Step-by-step instructions: how to replace brushes on a ŠKODA Superb 2

Replacing brushes with Superb 2 takes no more than 10 minutes and requires no tools. The main thing is to remove the old brushes correctly without damaging the mount. Follow the instructions:

1. Raise the windshield wiper arm to a vertical position (perpendicular to the glass). Be careful - the spring in the mechanism is strong, do not release the lever suddenly!

2. Click on fastening clamp (located on the side of the brush, closer to the lever) and pull the brush down to remove it from the hook.

3. Take the new brush and align its mount with the lever. Press until you hear a click and the latch should snap into place.

4. Lower the lever back onto the glass. Repeat the procedure for the second brush.

Important: on Superb 2 used modified mount — do not try to install brushes with a universal adapter without checking compatibility. If the new brush does not lock, then the mount is not suitable.

After replacing, turn on the windshield wipers for 1-2 minutes to make sure that the blades fit snugly and do not leave streaks. If you hear a squeak, apply it to the rubber. silicone grease (for example, WD-40 Specialist Silicone).

Common mistakes when replacing brushes and how to avoid them

Even such a simple procedure as replacing windshield wipers can turn into problems if mistakes are made. Here are the most common ones among owners Superb 2:

1. Buying the wrong size brushes. For example, setting 650 mm instead of 600 mm will result in the blade touching the edge of the glass or the car body.

2. Ignoring Mount Type. Fastening Side Pin 9x3 often confused with Hook 9x3 - they are visually similar, but not interchangeable.

3. Strong pressure on the lever. If the brush does not seat easily, do not try to push - this can break the latch or bend the lever.

4. Replacing only one brush. If you change the driver's side, be sure to replace the passenger's side as well—different wear will lead to uneven cleaning.

To avoid errors:

• 📏 Always check with sizes (600 mm and 400 mm).
• 🔍 Check fastening markings on the packaging.
• 🛒 Buy brushes from trusted stores (for example, Exist.ru, Autodoc, official dealers).

How to extend the life of your windshield wiper blades

Brushes on Superb 2 can last longer than the standard 6-12 months if you follow simple care rules. Here's what the experts recommend:

• 💧 Regular cleaning. Once a month, wash the brushes with soapy water to remove dirt and wax residue from the glass.
• ❄️ Ice protection. In winter, before parking, raise the windshield wiper arms to prevent the blades from freezing to the glass.
• 🛢️ Use of special fluids. Fill the washer reservoir winter liquid (up to –25°C) and avoid water - it freezes and damages the rubber.
• 🌞 Parking in the shade. Ultraviolet radiation destroys rubber, so try to leave the car under a canopy or in a garage.

It is also useful to treat rubber blades once every 3 months. silicone grease - this prevents cracking and improves sliding on glass. Don't use it for this WD-40 in the usual version - it contains solvents that are harmful to rubber.

What are the dangers of saving on brushes?

Cheap brushes made of low-quality rubber can leave micro-scratches on the glass, which over time will turn into cloudy spots. Eliminating them will cost 3–5 times more than buying good brushes.

Where to buy brushes for ŠKODA Superb 2: prices and trusted sellers

Prices for brushes for Superb 2 vary from 300 to 3,000 rubles per set, depending on the brand and type (frame, frameless, hybrid). Here's where to buy:

Store type	Approximate prices	Pros	Cons
Official dealer ŠKODA	2 500–3 000 ₽	Original parts guarantee	Expensive, long wait
Online stores (Autodoc, Exist)	800–2 000 ₽	Large selection, fast delivery	Risk of running into a fake
Retail stores (Auto49, Chip and Dip)	600–1 500 ₽	You can touch before you buy	Limited assortment
Markets or AliExpress	300–800 ₽	Low price	High risk of marriage, long wait

Tip: when buying online, check the seller's reviews and pay attention to the photo of the mount. Reliable stores always indicate exact article number and include photos of the packaging.

FAQ: Frequently asked questions about windshield wiper blades on Superb 2

Is it possible to install frameless brushes on Superb 2?

Yes, but only if they have a mount Side Pin 9x3. Frameless brushes (for example, Bosch Aerotwin or Valeo Silencio) are better suited than frame ones, as they fit more evenly to the glass and last longer. The main thing is to choose the right size (600 mm and 400 mm).

What to do if new brushes squeak?

The squeaking noise is usually caused by dry rubber. Try:

1. Wipe the brushes with alcohol (removes factory grease).
2. Apply silicone lubricant to the blade.
3. Check to see if any dirt has gotten between the brush and the glass.

If the squeak does not disappear, the brushes are defective (return under warranty).

Are brushes from Passat B6 suitable?

Yes, ŠKODA Superb 2 and VW Passat B6/B7 use brushes of the same size and fastening. The items are completely interchangeable. Brushes from Audi A4 B7/B8 and VW CC.

How often should brushes be changed?

Recommended interval - every 6–12 months, but depends on operating conditions:

• In cities with high pollution (dust, smog) - every 6 months.
• In case of frequent rains or use of winter liquids - once every 8–10 months.
• When parked in a garage and rarely used - once every 12-18 months.

Is it possible to restore old brushes?

Partially yes. If the rubber is not cracked, try:

1. Clean the blades from dirt with a toothbrush and soap solution.
2. Soak the brushes for 10 minutes in warm water and vinegar (1:1) - this will soften the rubber.
3. Apply to blades glycerin or silicone grease.

But this is a temporary measure - after 1-2 months the brushes will still have to be replaced.