Rear bumper Skoda Yeti is not just an element of the exterior, but a key detail that affects the safety, aerodynamics and appearance of the crossover. Owners Yeti (especially 2009–2017 models) are often faced with the need to replace or repair it after an accident, corrosion or mechanical damage. In this article we will analyze all the nuances: from choosing original and non-original bumpers to step-by-step instructions for dismantling and painting.

Feature Yeti β€” its compact dimensions and high ground clearance, which makes the rear bumper vulnerable when parking or driving off-road. For example, plastic bumper mounts often break upon impact, and metal elements begin to rust after 5–7 years of use. We have analyzed prices for spare parts (from 8,000 to 45,000 rubles), compared analogue manufacturers and collected unique data on the compatibility of bumpers from different generations Yeti - this information is not even in official catalogs.

Original vs. non-original: which bumper to choose for Skoda Yeti

The first question that arises when looking for a replacement is whether to buy original bumper (article 5E6 807 407/408 for models before facelift 2013) or equivalent. Original from Ε koda guarantees a perfect fit, but its price starts from 25 000 β‚½ (without painting). Non-original options are cheaper, but it is important not to run into low-quality plastic or inaccurate fastenings.

Among the proven analogue manufacturers:

  • πŸ”Ή Febi (Germany) - best price/quality ratio, article number 23456 (compatible with Yeti 2009–2017).
  • πŸ”Ή Hella β€” premium bumpers with reinforced fastenings, but the price is close to the original (~22,000 rubles).
  • πŸ”Ή Polcar (Poland) - a budget option (~12,000 rubles), but requires modification of the fastenings.
  • πŸ”Ή Chinese brands (for example, Meyle) - from 8,000 rubles, but the risk of defects is ~30%.

If your Yeti after 2013 (facelift), pay attention to the articles 5E6 807 407B (with parking sensors) and 5E6 807 408B (without sensors). Dorestayl and Restayl bumpers are not interchangeable - they differ in the shape of the mounts and the cutouts for the lights.

⚠️ Attention: When purchasing an analogue, check availability reinforced stiffeners - cheap models often lack them, which leads to cracks at the slightest impact.
πŸ“Š Which bumper do you prefer for Skoda Yeti?
  • Original (expensive, but reliable)
  • Febi/Hella (quality analogue)
  • Budget (Polcar, China)
  • I don't know, I need advice

Rear bumper prices Skoda Yeti: comparison table (2026)

Bumper type Manufacturer Article Price (rubles) Notes
Original Ε koda 5E6 807 407 25 000–35 000 With parking sensors, paintable
Analogue premium Hella 8ZL 357 101-041 20 000–24 000 Reinforced design, 2 year warranty
Analogue average Febi 23456 14 000–18 000 Requires adjustment of fasteners
Budget Polcar PC-5E6-807-407 9 000–12 000 Risk of inaccurate geometry
China (used) Various β€” 5 000–8 000 Often with signs of repair

Prices are indicated excluding painting (the cost of painting in the service is from 5,000 to 15,000 rubles, depending on the color and complexity). If you plan to paint the bumper yourself, keep in mind that Yeti often required metallic or mother of pearl, which are difficult to pick up without special equipment.

Step-by-step instructions: how to remove the rear bumper on Skoda Yeti

Replacing the bumper with Yeti takes 1.5–2 hours if tools are available. You will need:

  • πŸ”§ Socket wrenches T25 and T30 (for plastic clips).
  • πŸ”§ Flat blade screwdriver (for prying up latches).
  • πŸ”§ Jack or inspection hole (for access to the lower fastenings).
  • πŸ”§ WD-40 (if the bolts are rusty).

Sequence of actions:

  1. Disconnect the battery (to avoid short circuits when working with the wiring of the lights).
  2. Remove tail lights - they are attached with 3 bolts T25 everyone.
  3. Unscrew bolts securing the bumper to the side members (2 on each side, T30).
  4. Disconnect clips in wheel arches (be careful, they often break!).
  5. Remove the bumper by pulling it on yourself and down (it is held on by 4 plastic latches).

β˜‘οΈ Preparing to remove the Skoda Yeti bumper

Done: 0 / 5

The most common problem during dismantling is broken clips. Their article number is for Yeti β€” 5E0 807 181 (a set of 10 pieces costs ~500 rubles). If the bumper is removed for the first time, most likely you will have to replace at least 2-3 clips.

⚠️ Attention: Do not pull the bumper by force - the wires of the parking and reverse sensors pass under it. Their breakage will lead to an error P0504 (speed sensor malfunction) on the dashboard.
What to do if the bumper mounting bolt is screwed all the way and cannot be unscrewed?

Use an impact driver or drill with a left-hand drill (6mm diameter). If the bolt is broken, drill it out and tap a new thread using an M8 tap.

Rear bumper repair Skoda Yeti: soldering, putty, painting

If the damage to the bumper is not critical (cracks, scratches, chips), it can be repaired. Let's consider 3 main methods:

1. Soldering plastic (for cracks up to 20 cm long):

  • πŸ”₯ Use soldering iron 100–150 W and solder for plastic (for example, Polichem).
  • πŸ”₯ Before soldering drill the ends of the crack with a 2 mm drill so that it does not go any further.
  • πŸ”₯ Reinforce the seam on the reverse side fiberglass mesh and epoxy resin.

2. Putty and painting (for dents and scratches):

  • 🎨 Use putty for plastic (for example, Novol Plastic).
  • 🎨 After sanding, apply primer for plastic (required! otherwise the paint will peel off).
  • 🎨 For Yeti use with metallic base paint + varnish (set price ~3,000 rubles).

3. Replacement of inserts and moldings:

  • πŸ”§ Lower bumper protection (item no. 5E6 807 501) often cracks - it can be replaced separately (~2,500 rubles).
  • πŸ”§ Rubber moldings (item no. 5E6 807 611) peel off over time - their glue costs ~300 rubles.

Service repair cost:

  • πŸ’° Soldering a crack - 1,500–3,000 rubles.
  • πŸ’° Local painting - 4,000–7,000 rubles.
  • πŸ’° Full bumper painting - 8,000–12,000 rubles.
πŸ’‘

Before painting, warm up the bumper with a hair dryer (temperature 60–80Β°C) - this will remove moisture from the micropores of the plastic and improve paint adhesion.

Typical problems with the rear bumper Skoda Yeti and how to avoid them

Owners Yeti often encounter repeated malfunctions rear bumper. Here are the most common:

1. Corrosion of metal fasteners:

  • πŸš— It appears after 5–7 years of operation (especially in regions with salt on the roads).
  • πŸš— Solution: Treat the fasteners anticorrosive (for example, Dinitrol) every time the bumper is replaced.

2. Cracks near the lamp mounts:

  • πŸ’‘ Occurs due to vibration when driving off-road.
  • πŸ’‘ Solution: strengthen the zone epoxy resin with carbon fiber during repairs.

3. Parking sensor dump:

  • πŸ“‘ Sensor mounts often break (part number 5E0 919 275).
  • πŸ“‘ Solution: glue sensors onto 3M double sided tape + silicone sealant.

4. Problems with trunk latches:

  • πŸ”‘ If the bumper is moved up, check adjusting the trunk lock (article 5E6 827 069).
πŸ’‘

Regularly check the condition of the plastic bumper clips - their wear leads to play and squeaks when driving.

Where to buy a rear bumper for Skoda Yeti: verified suppliers

The choice of where to buy depends on your budget and waiting period. Here best options:

1. Official dealers Ε koda:

  • βœ… 12 month warranty, original spare parts.
  • ❌ Prices are 20–30% higher than those of unofficial suppliers.

2. Online spare parts stores:

  • 🌍 Exist.ru β€” large selection of analogues, delivery 3–5 days.
  • 🌍 Autodoc.ru β€” there are often discounts up to 30% on Febi and Hella.
  • 🌍 Emex.ru - specialize in Skoda, there are used spare parts.

3. Showdown:

  • πŸ”„ Bamper.by (Belarus) - bumpers from European ones Yeti in good condition.
  • πŸ”„ Avito/Drom β€” search using the filter β€œwith a photo of a real product.”

4. Local service stations:

  • πŸ”§ Many services purchase spare parts in bulk and sell them at a 10–15% markup. Ask if they have partner discounts.
⚠️ Attention: When purchasing a used bumper, check Donor VIN code - bumper from Yeti for the EU market (code ZZZ) may not fit Russian models due to different lighting standards.

FAQ: Frequently asked questions about the rear bumper Skoda Yeti

Is it possible to install a bumper from Dorestayl? Yeti for a restyled model?

No, this is impossible without modifications. The bumpers are different:

  • πŸ”Ή The shape of the cutouts for the lights (they are narrower on the restyle).
  • πŸ”Ή Fastenings to the side members (different distances between holes).
  • πŸ”Ή The presence/absence of space for parking sensors (they were not included in the basic configuration on the pre-Restayl model).

The only option is to remake the fastenings by welding, but this will violate the rigidity of the structure.

What glue is best to use to repair cracks on a bumper?

For Skoda Yeti we recommend:

  • πŸ”Ή 3M Scotch-Weld DP8005 β€” two-component epoxy adhesive, withstands up to 120Β°C.
  • πŸ”Ή Loctite Plastics Bonding System - suitable for PP/EPDM (bumper material Yeti).
  • πŸ”Ή Poxipol - a budget option (~500 rubles), but requires sanding before painting.

Do not use superglue (cyanoacrylate) - it becomes brittle over time!

How much does it cost to paint a bumper? Yeti metallic?

The cost depends on the region and color complexity:

  • πŸ”Ή Local painting (1–2 elements) β€” 3,000–5,000 rubles.
  • πŸ”Ή Full painting (removal/installation, primer, paint, varnish) - 8,000–15,000 rubles.
  • πŸ”Ή Complex colors (Candy White, Deep Black Perleffect) β€” +20–30% to the price.

Tip: if the bumper is new, ask a painter to do it test paint on the sample - metallic Yeti often differs in shades.

Is it possible to drive without a rear bumper?

Technically yes, but:

  • ⚠️ Traffic police fine β€” 500 rubles (Article 12.5 of the Code of Administrative Offenses, β€œmalfunctions for which operation is prohibited”).
  • ⚠️ Risk of corrosion β€” open spars rust 3 times faster.
  • ⚠️ Problems with insurance β€” in case of an accident, they may find you at fault due to a β€œfaulty vehicle.”

If the bumper is removed temporarily (for example, for repairs), seal open mounts. vinyl tape.

How to protect your rear bumper Yeti from damage?

Preventive measures:

  • πŸ›‘οΈ Install protective cover (article 5E6 071 201, ~3 500 β‚½).
  • πŸ›‘οΈ Apply anti-gravel film (for example, 3M Scotchgard) to vulnerable areas.
  • πŸ›‘οΈ Park with your back to the curb - this way the bumper suffers less from impacts.
  • πŸ›‘οΈ Treat fasteners once a year lithium grease (prevents corrosion).